PRO OCTO frame with 25mm CARBON arms
Three versions available:
A. Octo with 25x325mm arms
B. Octo with 25x370mm arms
C. Octo with 25x400mm arms
D. Octo with 25x495mm arms
Short description: heavy weight OCTOcopter frame prepared for most popular controllers
like ArduPilot Mega, ArduPilot Mega 2, 45x45mm boards like MultiWii and other like DJI
Naza / Wookong with optional adapter (bellow).
Materials: Fiberglass G10/G11 2.5mm thick center boards, 1.0mm protective cage. Clear dome 0.2mm thick.
<> 745mm motor to motor distance (diagonal) with 325mm arms, up to 10" propellers,
<> 835mm motor to motor distance (diagonal) with 370mm arms, up to 12" propellers,
<> 895mm motor to motor distance (diagonal) with 400mm arms, up to 13" propellers,
Weight: with motor mounts <> 1290g (with 325mm arms),
Recommended motors and propellers: frame is designed for strong motors (up to 50mm width) and 10-13" propellers with thrust up to 3kg/arm.
You can use smaller motors (with 16x19mm screw holes) or bigger (with 19x25mm holes).
Remember that any motors and propellers should be ballanced before using it!
-two black 2.5mm fiberglass main plates,
- protective black fiberglass cage parts (1mm),
- 25mm carbon arms (length your choice),
- power distribution board NOT INCLUDED,
- clear dome, some Velcro for dome mounting,
- zip ties,
- screws, nuts, washers, spacers etc.
- motor mounts,
Not included: Assembly guide: not needed , please watch the pictures. Landing legs
This is the last batch of these frames, carbon fiber arms may be shipped with a differnt fiber pattern. (twill, wave, 3k)
Pictures shows optional equipment like controllers, motors etc are not included.
The specifications and designs are subject to be changed without prior notice for futher improvement.
Trademarks and product names used herein are for identification purposes only and may be trademarks of their respective companies