Medium lift OCTOcopter frame with 12x12mm arms
Short description: medium lift OCTOcopter frame prepared for most popular controllers like ArduPilot Mega, ArduPilot Mega 2, 45x45mm boards like MultiWii and othe like DJI Naza / Wookong with optional adapter (bellow).
Materials: Fiberglass G10/G11 1.6mm thick center boards, 1.0mm protective cage. Clear dome 0.2mm thick.
Size: <> 850mm motor to motor distance (diagonal) with 410mm arms.
Weight: with motor mounts <> 800g,
Recomended motors and propellers: frame is designed for medium motors and medium payload. 10-12" propellers with thrust up to 1.0kg/motor. You can use bigger propellers (12") but please don't exceed 1.0kg thrust with 12x12x1mm arm!
Remember that any motors and propellers should be ballanced before using it!
- two black 1.6mm fiberglass main plates,
- protective black fiberglass cage parts (1mm),
- 410mm arms (FIVE black, THREE red colour),
- power distribution board,
- screws, nuts, washers, spacers etc
Assembly guide: not needed ;)
Vibration Dampeners to connect frame with landing gear
Pictures shows optional equipment like controllers, motors etc are not included.
The specifications and designs are subject to be changed without prior notice for futher improvement.
Trademarks and product names used herein are for identification purposes only and may be trademarks of their respective companies