Medium lift QUADcopter frame with 12x12mm arms

Short description: medium lift QUADcopter frame prepared for most popular controllers like ArduPilot Mega, ArduPilot Mega 2, 45x45mm boards like MultiWii and othe like DJI Naza / Wookong with optional adapter (bellow).

 

Materials: Fiberglass G10/G11 1.6mm thick center boards, 

Size: <> 540mm motor to motor distance (diagonal) with 245mm arms.

Weight: with motor mounts <> 415g,
 

Recomended motors and propellers: frame is designed for medium motors and medium payload. 10-13" propellers with thrust up to 1.0kg/motor. You can use bigger propellers (13") but please don't exceed 1.0kg thrust with 12x12x1mm arm!
   

Remember that any motors and propellers should be ballanced before using it!

  

Included parts:

 

- two black 1.6mm fiberglass main plates,
- protective black fiberglass cage parts (1mm),
- 245mm arms (TWO black, TWO red colour),
- power distribution board,
- , some velcro for dome mounting,
- zipties,
- screws, nuts, washers, spacers etc  

Not Included:

- Assembly guide: not needed ;)

- Landing Legs

- clear dome

 

Two versions Avaiable. 

A.Smaller motor mounts - for standard size motors (28mm diameter) from 16mm to 19mm mount screws distance - included with this set.

 B. Bigger motor mounts - for bigger size motors (36mm diameter) from 19mm to 25mm mount screws distance - included with this set.

 

 Optional parts:

Mikrokopter ESC's support plate with parts:

DJI Wookong/Naza support plate:

155mm clearance landing legs

 

200mm clearance landing legs

 

Vibration Dampeners to connect frame with landing gear

 

Pictures shows optional equipment like controllers, motors etc are not included.

The specifications and designs are subject to be changed without prior notice for futher improvement.

Trademarks and product names used herein are for identification purposes only and may be trademarks of their respective companies