Medium lift OCTOcopter frame with 21.5mm carbon arms

 FRAME DO NOT INCLUDE ANY CARBON TUBE ARMS

  Short description: medium lift OCTOcopter frame prepared for most popular controllers like ArduPilot Mega, ArduPilot Mega 2, 45x45mm boards like MultiWii and othe like DJI Naza / Wookong with optional adapter (bellow).

Materials: Fiberglass G10/G11 2.0mm thick center boards, 1.0mm protective cage. Clear dome 0.2mm thick.
Size: <> 820mm motor to motor distance (diagonal) with 370mm arms. <> 880mm with 400mm arms.

Weight: with motor mounts <> 1050g,

Recomended motors and propellers: frame is designed for medium motors and medium payload. Thrust up to 1.5kg / motor. Propellers: 10-11" with arms 370mm, 12" with 400mm arms.

If you want to use bigger propellers you should use frame based on 25mm arms (in our offer pretty soon).
Remember that any motors and propellers should be ballanced before using it!

Included parts:

- two black 2.0mm fiberglass main plates,
- protective black fiberglass cage parts (1mm),
- power distribution Tower ,
- clear dome, some velcro for dome mounting,
- zipties,
- screws, nuts, washers, spacers etc
 - bigger motor mounts,    

Not included: 

Assembly guide: not needed ;)

Landing Legs  

 

 Optional parts: 

DJI GPS Support plate 

 

 

Mikrokopter ESC's support plate with parts:

DJI Wookong/Naza support plate:

 

 

215mm clearance landing legs

 

310mm clearance landing legs

  

 

This is the last batch of these frames, carbon fiber arms may be shipped with a differnt fiber pattern. (twill, wave, 3k)  

 

Pictures shows optional equipment like controllers, motors etc are not included.

The specifications and designs are subject to be changed without prior notice for futher improvement.

Trademarks and product names used herein are for identification purposes only and may be trademarks of their respective companies